15 Amp High Power Igniter Module

Overview:

The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing ignition coils to reach their maximum coil energy. Available in 4, 6 & 8 channel packages, the HPI is an ideal upgrade for any transistor ignition system.When used in conjunction with a Haltech Platinum ECU, the HPI provides the perfect ignition system for any high performance engine.

Engine Suitability:
• Various

Features:
• HPI4 = 4 x Ignition Outputs
• HPI6 = 6 x Ignition Outputs
• HPI8 = 8 x Ignition Outputs

Power Requirements:
• Source: 8.6 to 16.5 Volts DC

Physical Dimensions:
• Length: 55mm
• Width: 104mm
• Height: 40mm

Weight:
• ECU: 285g (0.62 lb)
• Optional Harness: 395g (0.87lb)

Downloads:
Haltech High Power Igniter Specifications
Haltech High Power Igniter Quick Start Guide
Haltech Accessory Downloads Page

OEM Ignition Module

Haltech has a range of ignition modules available for use with our systems. Single channel, Dual channel and Three channel modules are available in an ecu-dwell format (ecu required to control dwell time). All variants are supplied with built in temperature protection and a maximum current limit of 9 Amperes.
The Ignition module is an amplifier designed to fire an electronic ignition coil. The ECU ignition signal connects to the ignition module, which then fires the ignition coil.

Single Channel

(Haltech)
Suitable to fire one coil, commonly used in a distributor application.

Dual Channel

(Haltech)
Suitable to fire two ignition coils, commonly used in a 4 cylinder direct fire wasted spark application.

Triple Channel

(Haltech)
Suitable to fire three ignition coils, commonly used in a 6 cylinder direct fire wasted spark application.

Coils

LS1 Ignition Coil

A high energy single coil with ‘built-in igniter’. For use with wasted spark and direct fire application.

Dual 12V Ignition Coil

A high energy single coil with two posts. For use with a wasted spark direct fire application.