15 Amp High Power Igniter Module
The Haltech High Power Igniter is capable of driving up to 15 Amps per channel, allowing ignition coils to reach their maximum coil energy. Available in 4, 6 & 8 channel packages, the HPI is an ideal upgrade for any transistor ignition system.When used in conjunction with a Haltech Platinum ECU, the HPI provides the perfect ignition system for any high performance engine.
• HPI4 = 4 x Ignition Outputs
• HPI6 = 6 x Ignition Outputs
• HPI8 = 8 x Ignition Outputs
• Source: 8.6 to 16.5 Volts DC
• Length: 55mm
• Width: 104mm
• Height: 40mm
• ECU: 285g (0.62 lb)
• Optional Harness: 395g (0.87lb)
OEM Ignition Module
Haltech has a range of ignition modules available for use with our systems. Single channel, Dual channel and Three channel modules are available in an ecu-dwell format (ecu required to control dwell time). All variants are supplied with built in temperature protection and a maximum current limit of 9 Amperes.
The Ignition module is an amplifier designed to fire an electronic ignition coil. The ECU ignition signal connects to the ignition module, which then fires the ignition coil.
Suitable to fire one coil, commonly used in a distributor application.
Suitable to fire two ignition coils, commonly used in a 4 cylinder direct fire wasted spark application.
Suitable to fire three ignition coils, commonly used in a 6 cylinder direct fire wasted spark application.
LS1 Ignition Coil
A high energy single coil with ‘built-in igniter’. For use with wasted spark and direct fire application.
Dual 12V Ignition Coil
A high energy single coil with two posts. For use with a wasted spark direct fire application.