Racepak Dashes

Racepak has been the world’s most recognized name in data acquisition for over 30 years. With a comprehensive range of dashes, sensors, loggers, software, gauges, modules, cables and ancillary equipment Racepak products are a perfect match for Haltech engine management.

Racepak IQ3 Display Dash

250-DS-IQ3S

Part Number: HT-06-250-DS-IQ3

Included: IQ3 Display Dash, USB programming cable, Racepak Datalink II software

Optimized for the racer who needs to view vital functions quickly and easily, the IQ3 Display Dash can display up to 28 inputs on four pages. All display inputs are user-definable, allowing the most critical data to be viewed at a glance. It also features programmable shift lights and warning lights and gear indicator. The blue backlight is viewable in any lighting condition. The IQ3 Display Dash can be utilized with any of Racepak’s V-Net data loggers.

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Racepak IQ3 Drag Race Dash

250-DS-IQ3

Part Number: HT-06-250-DS-IQ3D

Included: IQ3D Dash, Wiring harness (includes 2 programming buttons), Driveshaft Sensor, Oil Pressure Sensor, Water Temperature Sensor, USB programming cable,Racepak Datalink II software, MicroSD card & reader.

The IQ3D is designed for the sportsman drag racer looking for a compact, all-in-one solution. It combines the look and feel of our popular IQ3 dash with a robust, built-in data logger. Information is displayed on four user-definable pages and recorded data is stored on a microSD memory card located on the face of the dash for easy access. The IQ3D has built-in support for over 20 of the most popular EFI systems:
– AEM V2/EMS-4/Infinity EMS
– Big Stuff 3
– Electromotive TECGT
– EMS EM-Tech ECU
– Emtron ECU
– FAST XFI
– Fuel Tech (200,250,300,350,500v1,500v2, 600)
– Holley Dominator
– InjPro
– Link G4+ Series
– MEFI-4B
– MegaSquirt-III (DIY Autotune)
– MicroTech
– MoTeC CAN (Data set 3)
– MSD Atomic LS
– MSD Atomic TBI
– OBD-II (2008 and later)
– Pro EFI

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Racepak IQ3 Logger Dash

250-DS-IQ3LD

Part Number: HT-06-250-DS-IQ3LD

Included: IQ3 Data Logger Dash, Power/Ground/Engine RPM harness, 512mb microSD memory card, GPS antenna and cable, Programming cable, DatalinkII software and installation manual.

The IQ3 Logger Dash combines a 32 channel data logger with a complete display dash. This eliminates the need for an external data recorder and simplifies wiring complexity. The display features four user-definable pages of data with programmable shift and warning lights, gear indicator, and the ability to display lap times, predictive lap and best lap. Data is collected on a front-mounted MicroSD card for convenience. Internal GPS speed measurement eliminates the need for added wheel sensors.

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Racepak IQ3 Street Dash

250-DS-IQ3S

Part Number: HT-06-250-DS-IQ3S

The IQ3s is a complete dash cluster replacement, providing all standard road functions in a compact, simple to use unit. Standard data, such as speed, odometer, turn signals, hi/low beam and parking brake indicators are displayed, along with programmable shift and warning lights. It is an ideal complete instrumentation package for vehicles with modern engine swaps or aftermarket EFI systems.

Included: IQ3s Dash, Wiring harness (includes 2 programming buttons 1 – Oil Pressure Sensor, 2 – Fluid Temperature Sensors), USB programming cable, Racepak Datalink II software.

Compatible with:
– AEM V2/EMS-4/Infinity EMS
– Big Stuff 3
– Electromotive TECGT
– EMS EM-Tech ECU
– Emtron ECU
– FAST XFI
– Fuel Tech (200,250,300,350,500v1,500v2, 600)
– Holley Dominator
– InjPro
– Link G4+ Series
– MEFI-4B
– MegaSquirt-III (DIY Autotune)
– MicroTech
– MoTeC CAN (Data set 3)
– MSD Atomic LS
– MSD Atomic TBI
– OBD-II (2008 and later)
– Pro EFI
buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Racepak IQ3 Display Dash – Polaris RZR

250-DS-IQ3RZR

Part Number: HT-06-250-DS-IQ3RZR

The IQ3RZR dash is a plug and play, high performance instrumentation package for 2014-2015 RZR1000 and RZR900. The IQ3RZR pre-programmed dash simply plugs into the factory ECU harness, instantly providing all factory ECU data channels, indicators and warnings, along with GPS Speed, heading and time provided by the IQ3’s internal GPS. A variety of optional external sensors maybe be connected to the IQ3RZR dash, through Racepak’s unique plug and play, single cable V-Net sensor technology.

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Racepak IQ3 Polaris RZR Kit

250-KT-IQ3RZR

Part Number: HT-06-250-KT-IQ3RZR

Included: IQ3RZR Dash, ECU harness with programming and screen change buttons, GPS antenna, Clear cover, Mount panel, USB programming cable, Racepak Datalink II software.

The IQ3RZR dash kit replaces the factory speedometer on the 2014-15 Polaris RZR 1000 and 2015 RZR 900 with a comprehensive digital display that shows complete engine information. It connects seamlessly to the factory ECU, and can be programmed to display up to 24 additional sensor inputs. The dash kit includes a clear cover to protect the screen from dust and dirt, and a mount panel that replaces the factory dash and mounts to the factory location.

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Ultradash Extreme Kit

250-KT-UDX

Part Number: HT-06-250-KT-UDX

The UDX display dash is designed to be used as an add on instrument for V-series recorders. It will display any function that is being monitored by the recorder to which it is attached.

UDX dashes are capable of displaying up to 21 different functions. There are five numeric displays, plus the engine RPM sweep bar, on each of the four screen ‘pages’. Scrolling from one page to the next is accomplished with the push of a button. The 7.25” x 2.62” LCD screen is backlit for night time operation. Each dash has output for a shift light, and shift point programming is done right on the screen. Warning lights are located on each side of the display screen. You have the ability to assign these high or low threshold alarms to your choice of monitored functions. The buttons at the bottom of the panel are used to scroll through the screen pages as well as to activate various functions. Additional sensors can be added by using the popular individual V-Net sensor and modules.

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Ultradash Logger Extreme Kit

250-KT-LDX

Part Number: HT-06-250-KT-LDX

The LDX combines data acquisition with our advanced instrumentation! The LDX Logger also takes full advantage of the capabilities of the V-Net technology. In addition to the wiring harness that imports the signals from the engine RPM, drive-shaft RPM, water temperature, oil pressure, and battery voltage, up to 32 optional sensors modules can be attached to the single V-Net network cable. This yields a total recording capability of 37 channels of data.

The LDX Logger can record and upload to a PC the data from all of the monitored sensors, while at the same time displaying the input from up to 21 of those functions on the dash screen. With the simple push of a button you can view the displayed functions by scrolling through four separate screen pages on the dash.

Memory and sample rates are consistent with the V300 recorder. One full megabyte of memory provides a generous amount of recording time, while sample rates are programmable up to 100 per second per channel. Uploading data to a PC or laptop is accomplished through a provided 6’ serial cable. The screen is backlit for night time use. Four threaded studs on the rear of the LDX Dash Logger facilitate mounting it to any flat surface.

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Ultradash – MEFI4B Kit (MSD)

250-KT-UDX

Part Number: HT-06-250-KT-UDXEFIM

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Ultradash – Autronics Street

250-KT-UDX

Part Number: HT-06-250-KT-UDXSRAUT

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Ultradash – Big Stuff 3

250-KT-UDX

Part Number: HT-06-250-DS-UDXBS3

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Ultradash – MEFI 4B

250-KT-UDX

Part Number: HT-06-250-DS-UDXEFIM

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Ultradash Extreme Replay

250-DS-UDXRP

Part Number: HT-06-250-DS-UDXRP

he Replay Dash is a stand-alone unit, capable of providing real time display while also storing up to 10 minutes of memory for replay on the dash. The Replay Dash kit includes a wire loom and sensors for engine RPM, water temperature, oil pressure, and battery voltage. Sensors for monitoring other function must be purchased as options.

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Ultradash Extreme EFI

UDXSR

Part Number: HT-06-250-DS-UDXEFI

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Ultradash Extreme – Atomic EFI

UDXSR

Part Number: HT-06-250-DS-UDXEFIAT

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Ultradash Extreme – Street Rod

UDXSR

Part Number: HT-06-250-DS-UDXSR

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

IQ3 Dash Clip on clear plastic cover

250-DS-IQ3CVR_01

Part Number: HT-06-250-DS-IQ3CVR
IQ3 Dash Clip on clear plastic cover – Great for Boats, Bikes and Off-road Buggies etc

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

IQ3 Dash Clear plastic cover with mounting flange

250-DS-IQ3CVR-2_01

Part Number: HT-06-250-DS-IQ3CVRWF
IQ3 Dash Clear plastic cover with mounting flange. Great for off road and marine use; boats, bikes and off road buggies.

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

IQ3 Dash Moulded Panel Mount – Brushed Silver

800-MB-IQ3-PAL_01

Part Number: HT-06-800-MB-IQ3-PAL
20″ x 10″ / 500mm x 250mm

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

IQ3 Dash Moulded Panel Mount – Textured Black

800-MB-IQ3-PBLK_01

Part Number: HT-06-800-MB-IQ3-PBLK
20″ x 10″ / 500mm x 250mm

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

IQ3 Dash Moulded Panel Mount – Faux Carbon Fibre Look

800-MB-IQ3-PCF_01

Part Number: HT-06-800-MB-IQ3-PCF
20″ x 10″ / 500mm x 250mm

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

IQ3 Dash Mounting Bracket

800-MB-IQ3_01

Part Number: HT-06-800-MB-IQ3
IQ3 Dash Mounting Bracket – Black anodized aluminium

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

OBDII CAN Dash Adaptor Harness

280-CA-EFIOBDII_01

Part Number: HT-06-280-CA-EFIOBDII

OBDII (typically 2008 onwards) CAN Dash adaptor harness for Haltech IQ3 Street dash, Race dash & Racepak IQ3S, IQ3D, Universal CAN Interface Module (HT-06-230-VM-EFIUCAN)
DTM2 to OBDII (Scan tool style, male pins, female connector) connector 58″/1.4m cable

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Racepak CAN Dash Adaptor Harness for EFI assorted ECUs

280-CA-EFICAN_01

Part Number: HT-06-280-CA-EFICAN
DTM 2 to 2 wire flying lead only

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Racepak CAN Dash adaptor harness for – EFI ATOMIC TBI ECU

280-CA-EFIATBI_01

Part Number: HT-06-280-CA-EFIATBI
DTM 2 to ATOMIC TBI ECU style CAN connector

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Racepak CAN Dash adaptor harness for – EFI BIG STUFF 3 ECU

280-CA-EFIB53_01

Part Number: HT-06-280-CA-EFIBS3
DTM 2 to BIG STUFF 3 ECU style CAN connector

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Racepak CAN Dash adaptor harness for – EFI FUEL TECH

280-CA-EFIFUEL_01

Part Number: HT-06-280-CA-EFIFUEL
DTM 2 to FUEL TECH ECU style CAN connector

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Racepak CAN Dash adaptor harness for – EFI HOLLEY

280-CA-EFIHOL_01

Part Number: HT-06-280-CA-EFIHOL
Racepak CAN Dash adaptor harness for – EFI HOLLEY (DTM 2 to HOLLEY ECU style CAN connector)

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Racepak CAN Dash adaptor harness for – EFI LINK

280-CA-EFILINK_01

Part Number: HT-06-280-CA-EFILINK
DTM 2 to Link ECU style CAN connector

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP

Racepak CAN Dash adaptor harness for – EFI MEFI ECU

280-CA-EFIMEFI_01

Part Number: HT-06-280-CA-EFIMEFI
DTM 2 to MEFI ECU style CAN connector

buy-now-icon_AUSbuy-now-icon_USAbuy-now-icon_EXP