added sensor calibrations for multiple vehicles
added unit convertors for mass flow
added sensor calibration files for multiple vehicles
added Toyota Supra basemaps
added Subaru MY06-07 basemaps
added Subaru USDM MY07 basemaps
added Subaru WRX MY06-07 calibrations
added Subaru Liberty Legacy 3.0R Spec B EZ30 calibrations.
new help file
Requires Datalog Viewer 1.1.1.
Updated default page layouts.
Added suzuki swift calibration files.
Added *Mainline Dyno* support.
Added *Elite 750* support.
Updated FTDI VCP driver.
Added Polaris and PWC Basemaps.
ESP Online software updates now show version descriptions.
ESP Online software updates will display a list of all later versions rather than showing only the lastest one.
Function List now has hierarchical groupings for related functions.
Added momentary knock control to knock detection.
AVI switch on/off voltage settings grey out when signal type is not state.
IO signal channels will grey out if they are not used by any function.
Fixed issue in I/O Report where pin wire colour label text was being truncated.
Fixed issue in Channel Selection dialogue where channels names were being truncated.
Fixed issue where Stepper outputs were available as DPOs even when already assigned.
Fixed issue where Stepper outputs were not redifying when they were assigned as both stepper and DPO.
Fixes ESP crashing on startup when AVG AntiVirus is installed.
Added calibration files for Yamaha PWC, Polaris RZR XP 1000, & Polaris 900.
Added temperature calibrations for Ford Coyote.
Improved error handling for datalog errors; corrupt datalogs can now be cleared.
Copy/paste in table axis setup now uses display values rather than raw values.
Fixed issue where some definition files would not automatically download.
Added tooltips to fuel staging setup.
Fixed issues relating to limited access mode.
Added automatic file associations on ESP Online "add support".
Added PgUp PgDn feature to single value settings.
Added Sport import path for trig/home pull-up/gnd_ref settings.
Fixed bug where map upgrade from voltage calibration to resistance calibration was clipping values at 5000.
Added new calibration file "Temperature - VDO 120C Coolant Sensor.cal".
Added new calibration file "Temperature - VW 120c PN 049 919 501 m10x1.cal".
Fixed bug where copy-pasting values into table axes didn't work.
Fixed bug where ESP sometimes hangs on firmware update.
Moved software updates into ESP Online.
Fixed page layouts auto-save corruption.
Fixed "Could not open file" error on ESP Online "upload to device".
Fixed rounding error of end columns when linearising over multiple rows.
Fixed datalogs not displaying if records span the date roll over.
Fixed "File not found" error when ESP online tries to retrieve *hdef file.
Added Pressure Sensor Calibration file " Pressure - Haltech TI 7 Bar HT010130.cal"
Changes to enforce full map upload after firmware upgrade.
Fixed issue with loosing focus of mouse cursor in F4 page.
Increased stability of data logging and display.
Fixed some condition system glitches.
Added Trigger (+ve), Trigger (-ve), Home (+ve) and Home (-ve) to IO report.
Added colour codes to all pin references, including IO report
Added check for framework library directory existence
Fixed spelling mistakes
Auto extracts HDEF file when firmware is downloaded through ESP Online.
Collapsed all nodes in the import dialogue.
Removed 'Style' option from axis selection.
Fixed stability issue when saving data logs.
Fixed issue wih opening a binary table in the 2D view.
Fixed threading issue with ending a PC log.
Fixed PC logging issue with deceptive ramping of values when no change had occurred.
Fixed reading of vehicle speed when clicking the read button in the F4 page.
Added Haltech Support CAN Dash device to the devices panel.
SaveAs suggested file name updates each time it is used.
Fixed estimated data logging time.
Added scroll bars to ESP Online Firmware Library list.
Added mouse scroll wheel capabilities to IO Report and pin selection.
Improved data logging stability.
Improved general stability
Added firmware management into ESP Online. This is the first ESP Online service. Look for the ESP Online next to the Haltech logo!!
Fixed issue with removing mandatory functions.
Removed legacy version checking code. This allows for firmware of any version to connect with an appropriate HDEF.
Fixed issue where help was loading with unknown page.
Removed the extra '/' from the online help address.
Fixed potential issue with initial load.
Added software revision number to shortcut name.
Fixed issue with splitter in function tree.