Login / Register | Cart (0)USD

Elite Pro Plug-in for Ford Barra FG mkII is here!


UPDATE: This ECU now also supports Ford Falcon FG MkII with the I6 4.0-litre DOHC VCT “Barra” engine and ZF 6HP26, 6-speed auto transmission.


Haltech’s new Elite Pro Plug-in ECU offers a true Plug’n’Play upgrade option for the popular Barra-powered Ford Falcon.

No messy and time-consuming re-wiring required – the Elite Pro Plug-in connects directly to the factory wiring harness and fits perfectly in the factory ECU location.

With an on-board wideband controller and sophisticated race functions the Elite Pro Plug-in is one of Haltech’s most advanced ECUs to date.

Apart from performance-oriented features like closed loop boost control, anti-lag and launch control, short and long term learning for fuel, ignition, boost and idle, the new Elite Pro Plug-in also controls all factory functions including variable cam control, cruise control, dash cluster and even the 6-speed automatic transmission.

Ideal performance upgrade for naturally aspirated and turbocharged Ford Falcons!

Suits:
• Ford Falcon BA (02-05) I6 4.0-litre DOHC VCT “Barra” engine with manual transmission.
• Ford Falcon BF (05-08) I6 4.0-litre DOHC VCT “Barra” engine with manual transmission.
• Ford Falcon BF (05-08) I6 4.0-litre DOHC VCT “Barra” engine
  with ZF 6HP26, 6-speed auto transmission.
• Ford Falcon FG MkI (09-11) – coming soon
• Ford Falcon FG Mk II (11-14) I6 4.0-litre DOHC VCT “Barra” engine
  with ZF 6HP26, 6-speed auto transmission.
• Naturally aspirated or forced induction.
• Engines covered: Barra 182, 190, 240T, 245T, 270T.

Features:
• Die cast aluminium, water resistant case.
• On-board automatic transmission control via CAN (ZF 6HP26).
• E85 Flex Fuel ready.
• Multi-fuel support. Petrol, Methanol and Ethanol.
• Internal single channel wideband (supports LSU4.9 sensor).
• Variable cam control.
• Cruise control.
• OBDII compatible. Set and clear diagnostic trouble codes, view live engine data.
• Short and long term fuel, ignition, boost and idle control learning.
• Knock control with high speed digital filtering.
• Closed loop boost control. Tune by gear, wheel speed or time.
• Closed loop idle control with learning for consistent idle stability.
• Closed loop 02 control.
• Anti-lag and launch control with drag and rally modes.
• Multi level engine protection.
• ESP calibration software. Intuitive and easy to use, ESP offers
  limitless tuning flexibility. Tune your engine by a combination of
  4D tuning tables combined with 3D per cylinder compensations
  and multiple user definable corrections.

Outputs:
• 6 x current controlled injector drivers (OEM). High or Low impedance injector compatible.
• 8 x additional injector outputs available for staged injection,
  unused staged injector outputs are available
  to be used as generic programmable DPOs.
• 6 x ignition outputs to support OEM Ford coils directly
• Digital pulsed outputs – as per OEM.
• Drive By Wire (DBW) output suits any throttle body and pedal including Ford OEM.

Inputs:
• Analogue voltage inputs (AVI): as per OEM.
• 4 x additional user definable AVIs available on the auxiliary connector.
• Digital pulsed inputs (DPI): as per OEM.
• 4 x additional user definable DPIs used for measuring duty cycle, frequency or state.
• Engine position inputs: as per OEM. Supports Ford Barra trigger pattern.
  Alternate generic trigger support also available.
• Knock inputs: as per OEM.


Elite Pro Plug-in ECU
– Ford Falcon i6 Barra

Part No: HT-154000
Includes: Elite Pro Plug-in ECU, USB comms cable, AUX plug and pins, mounting hardware, USB software key, Quick Start Guide and a Wiring Diagram.


Elite Pro Plug-in ECU + Onboard Wideband O2 Sensor Kit
– Ford Falcon i6 Barra

Part No: HT-154006
Includes: Elite Pro Plug-in ECU, Wideband Sensor Kit, USB comms cable, AUX plug and pins, mounting hardware, USB software key, Quick Start Guide and a Wiring Diagram.


Wideband O2 Sensor Kit
for Elite Pro Plug-in ECU

Part No: HT-010740
Includes: O2 sensor, 1.2m extension cable, weld-on bung.


Auxiliary Flying Lead Harness
for Elite Pro Plug-in ECU

Part No: HT-131000
Includes: 2.5m flying lead, 34 pin connector with terminated DTM4 CAN socket, 18 wires populated (wideband input pins have waterproofing blanks).


Auxiliary Connector Harness Upgrade Kit
for Elite Pro Plug-in ECU

Part No: HT-131004
Includes: 18 colour-coded wires with pins crimped.


Wideband Harness
for Elite Pro Plug-in ECU

Part No: HT-131002
Includes: 1.2m wideband harness, Bosch LSU 4.9 connector, ECU pins.


Wideband O2 Sensor
for Elite Pro Plug-in ECU

Part No: HT-010718
Includes: Bosch LSU 4.9 sensor with factory calibration, resistor connector (NOTE: not Deutsch DT6 connector).


USB Extension Cable
for Elite Pro Plug-in ECU

Part No: HT-070013
Includes: Circular mini right angle connector to USB type B communications cable.