Login / Register | Cart (0)USD

Product Overview: Toyota JZX100, JZZ30 Plug’n’Play Adaptor


If you’re looking for a quick and easy plug-in solution to go with your Elite ECU then Plug’n’Play Adaptors are your best option.


Plug’n’Play Adaptor Harness allows you to use Haltech’s universal Elite ECUs by connecting them directly to the factory harness in your car via a Plug’n’Play Adaptor. This is an ideal solution for builders and tuners who want a quick and easy install without the need to rewire.

pluginadaptorbox PluginAdapter_diagram5

The Plug’n’Play Adaptor Harness comes complete with an adaptor box which has the factory ECU connector on one side and the Haltech mating connectors on the other.

 PluginAdapter_diagram6_web PluginAdapter_diagram3

The Adaptor Harness connects the adaptor box to an Elite ECU on one side and to your car’s factory ECU harness on the other.

With the Haltech ECU connected, launch the Elite Software Programmer (ESP) and load your base map from the Haltech base map library. The base map will be sufficient to get your car going and give you a great starting point for further tuning.

NOTE: This Plug’n’Play Adaptor Harness is available in a kit with either the Elite 2500 or Elite 2000 ECU

Models Supported:
Toyota JZX100 Mark II/Cresta/Chaser 1JZ-GTE VVT-i (manual transmission only)
Toyota JZZ30 Soarer MY96-01 1JZ-GTE VVT-i (manual transmission only)

Supported OEM Functionality:
– Ignition
– Injection
– Air Temperature Sensor
– Coolant Temperature Sensor
– MAF Sensor
– Throttle Position Sensor
– Narrowband O2 Sensor
– Tachometer
– A/C Request
– A/C Pressure Switch
– VVT-i Control
– Fuel Pressure Up VSV
– Fuel Pump
– Check Engine Light
– Knock Sensors
– Vehicle Speed Sensor
– Brake Light Sensor
– O2 Heater
– Idle Control / Stepper Motor

Toyota JZX100/JZZ30, 1JZ-GTE VVTi Direct Fire
Toyota JZX100/JZZ30, 1JZ-GTE VVTi