Login / Register | Cart (0)USD

Product Overview: Honda DC5 Plug’n’Play Adaptor Harness

Haltech Plug’n’Play Adaptor Harnesses plug in directly into the factory harness and connects it with a Haltech ECU. Ideal solution for builders and tuners who want a quick and easy install without the need to rewire the whole system.

Haltech now extends its Elite series support to the popular Honda Integra DC5/Acura RSX and Honda Civic EP3 with a new range of Plug’n’Play Adaptor Harnesses.


Honda Integra DC5 Elite 1500 Plug’n’Play Adaptor Harness

OEM Functionality Supported:
– Reverse lockout Solenoid Valve
– O2 Heater Control – (Elite 2500 only)
– Thermofan
– Fuel tank pressure sensor
– Electronic load detector
– Power steering
– Fuel Pump
– A/C clutch relay (A/C request signal required to be wired to Spare AVI to utilise)
– EVAP Canister Vent shut valve – (Elite 2500 only)
– Brake pedal switch
– Tachometer
– Check engine light
– VTC oil control solenoid
– VTEC solenoid valve
– VTEC oil pressure
– EVAP Canister Purge Valve (Elite 2500 only)
– Intake manifold runner position
– Knock sensor
– Top dead center sensor
– Crankshaft position sensor
– Intake manifold runner control
– Idle air control Valve
– Vehicle speed sensor
– TPS full range
– Manifold absolute pressure sensor

OEM Functions Not Supported:
Multiplex Control Unit Communications:
– Coolant Temperature Display on OEM Dash
– Battery Light on OEM Dash
– A/C request signal from Multiplex Control Unit
Immobiliser Code
A/F O2 sensor
A/F O2 heater control

Downloads: Basemaps and Quick Start Guide
More info: How Haltech Plug’n’Play Adaptors Work

ht-140961

Product: Honda Integra DC5 Plug’n’Play Adaptor Harness Only
Part Number: HT-140961
Models Supported: Integra DC5/Acura RSX 2005 – 2006. Does not support factory multiplexed coolant temperature gauge, battery light and AC request – Please see the product quick start guide for further information.
Includes:  Spare pins for the auxiliary connector plug.

   


ht-150961

Product: Honda Integra DC5 Elite 1500 Plug’n’Play Adaptor Harness Kit
Part Number: HT-150961
Models Supported: Honda DC5 / Acura RSX 2005 – 2006 Engine Codes: K20Z1 (Serial Output to Dash Not Supported)
Includes:  1 x Elite 1500 ECU, Plug’n’Play Adaptor Harness, Spare pins for the auxiliary connector plug.

   


Honda Civic EP3 Elite 1500 Plug’n’Play Adaptor Harness

OEM Functionality Supported:
– Fuel Pump Signal (Immobiliser)
– O2 Sensor signal
– O2 Heater Control Relay – (Elite 2500 only)
– Fuel tank pressure sensor
– Electronic Load detector
– Power steering
– A/C Clutch Relay (A/C Request Signal Required to be wired to Spare AVI to utilise)
– EVAP bypass solenoid valve – (Elite 2500 only)
– EVAP Canister vent shut valve – (Elite 2500 only)
– Brake pedal switch
– Vehicle speed output for dash
– Tachometer
– Malfunction indicator lamp
– VTC oil control solenoid
– Radiator fan controller
– Reverse lockout solenoid valve
– VTEC oil pressure switch
– VTEC solenoid valve
– Ait temp
– EVAP Canister purge valve – (ELITE 2500 ONLY)
– Intake manifold runner control
– Crankshaft position sensor
– Intake manifold runner position
– Knock signal
– Idle air control valve
– TPS
– Vehicle speed
– Manifold pressure signal
– Camshaft position sensor
– Top dead centre sensor

OEM Functionality not supported:
Multiplex Control Unit Communications:
– Coolant Temperature Display on OEM Dash
– Battery Light on OEM Dash
– A/C Request signal from Multiplex Control unit
Immobiliser Code
A/F O2 sensor
A/F O2 heater control

Downloads: Basemaps and Quick Start Guide
More info: How Haltech Plug’n’Play Adaptors Work

ht-140960

Product: Honda Civic EP3 Plug’n’Play Adaptor Harness Only
Part Number: HT-140960
Models Supported: Civic EP3 2002 – 2005, Integra DC5/Acura RSX 2002 – 2004, DC5/Acura RSX 2005 – 2006. (Does not support factory multiplexed coolant temperature gauge, battery light and AC request – Please see the product quick start guide for further information)
Includes:  Spare pins for the auxiliary connector plug.

   


ht-150960

Product: Honda Civic EP3 Elite 1500 Plug’n’Play Adaptor Harness Kit
Part Number: HT-150960
Models Supported: Civic EP3 2002 – 2005, Integra DC5/Acura RSX 2002 – 2004, DC5/Acura RSX 2005 – 2006. (Does not support factory multiplexed coolant temperature gauge, battery light and AC request – Please see the product quick start guide for further information)
Includes: 1 x Elite 1500 ECU, Plug’n’Play Adaptor Harness, Spare pins for the auxiliary connector plug.

   


Save

Save

Save

Save

Save